How To Draw Section Lines In Autocad

Observe how to use the Line Control to draw directly lines. You lot'll be introduced to how the Command Line works and how to use keystrokes to specify the distance and bending for each line in order to draw the complex shapes.

Make sure y'all have our free AutoCAD grade files downloaded prior to beginning the tutorial.

Getting Started

1. If AutoCAD isn't already open up, launch it at present.

2. You should come across the Start tab.

iii. Click on the large Start Cartoon push button.

A new Drawing1 tab will open. Drawing files use a .dwg file format and are based on a Drawing Template file (.dwt). For at present we'll use the default template file, only y'all'll see how to use customized templates in a subsequently exercise.

Using the Line Control

1. In the lower right corner, notice the Status Bar.

This contains buttons that can be used to plow some useful features on or off. When a button is turned on, information technology'south highlighted in blue.

2. For now, we want to make sure both Polar Tracking and ORTHOMODE are disabled. If either option is blueish, click information technology to switch it off. You'll learn how these work in the next practise.

3. Let's start drawing a line. In the Ribbon panel at the elevation of the screen, click on the first Line tool.

4. At the bottom of the screen, find that choosing the tool has activated the Control Line console.

The Command Line
When entering a command with the mouse or keyboard, it appears in the Control Line. You'll encounter the control y'all are in, the stage of the command, and the options that are available. Paying close attending to the Command Line volition brand you a more constructive user.

5. As you'll see with most AutoCAD cartoon tools, the outset step when a control is entered is to specify the start point. While we could click with the mouse to specify a coordinate, let's be more specific and blazon it in: To specify the starting betoken for our shape, press the 2 central, comma (,), and then four key again so that you terminate up with 2,4 in the command line:

line starting point

half dozen. Press the Enter key to apply the beginning point coordinates.

seven. Using the mouse, move the cursor up to bespeak the direction of the next point.

Annotation: You need to use the mouse to betoken in the general direction you lot want the line segment to go before inbound the distance and angle values.

8. To enter the desired distance amount, type vi, then printing Tab to switch to the bending input field.

first line segment

9. We want a 90° angle for this line so blazon 90 and printing Enter. You have just completed your first line segment!

x. For the next line segment (the angeled top-left corner):

Motion the cursor towards the right (to indicate direction)
Type in a distance of 8 units
Printing Tab
Enter an angle of 22°
Printing Enter to finish drawing the line segment

xi. For the adjacent line segment (the horizontal top):

Move the cursor towards the correct
Type in a altitude of 10 units
Press Tab
Enter an angle of 0°
Press Enter to end drawing the line segment

12. For the adjacent line segment (the angeled top-right corner):

Movement the cursor towards the correct
Type in a distance of 8 units
Press Tab
Enter an angle of 22°
Press Enter

thirteen. For the next line segment (the vertical right side):

Move the cursor towards down
Type in a altitude of 6 units
Press Tab
Enter an angle of 90°
Printing Enter

14. We can employ the Close option to both shut the shape and finish the command. To depict the lesser horizontal line segment, in the Command Line click Shut

15. Congratulations, y'all've simply fatigued your first shape! Salvage the file by going to File > Save As

sixteen. Proper name the file my first line drawing.dwg and click Save.

Acquire More About AutoCAD

Create professional person blueprints and mechanical drawings through our robust suite of AutoCAD classes in NYC. Our good instructors will guide yous through step-by-step tutorials and have you drafting like a pro in no time!